Cisco ASR 9000 Series Hardware Installation Guide

Step 7 Install the SPAs and SFP modules in the SPAs that use them. Refer to the SPA Installation and Removal, on page 94
section.
Step 8 If you are replacing a SIP install the SPAs in the same bays as you noted in Step 2 under the Removing a SIP, on page
89 section.
Step 9 Install the interface cables.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
92
Installing and Removing a SPA Interface Processor
Installing a SIP

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model