Cisco Catalyst 4500e Series - Page 150

Index
IN-4
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-01
installing
AC-input power supplies 4-4 to 4-8
DC-input power supplies 4-8 to 4-13
fan assemblies 4-13 to 4-15
installing switches in racks 3-2 to 3-7
L
labels, chassis serial number
See serial numbers
LEDs
checking power supplies 5-3
checking supervisor engines 5-2
POST results C-3
See also specific types of LEDs
switching modules D-7
switch load indicators D-3
Link LED
description (table) 1-22
LINK LEDs (table) 5-8, D-7
load sharing, power supplies 1-28
M
MAC addresses
supported on Catalyst 4503-E switches (table) 1-17
management
Ethernet D-4
local, on Catalyst 4503-E switches 1-2
local, on Catalyst 4506-E switches 1-5
local, on Catalyst 4507 switches 1-9, 1-13
remote, on Catalyst 4503-E switches 1-2
remote, on Catalyst 4506-E switches 1-5
remote, on Catalyst 4507 switches 1-9, 1-13
management port LED D-3
Media Access Control addresses
See MAC addresses
Mux buffers 4-15, 5-7
O
OUTPUT FAIL LED
environmental monitoring 1-29
P
packaging materials B-1
port status LEDs 5-9, D-7
POST
LEDs C-3
power
requirements 2-3
power cords
See AC-input power cords
power supplies
LEDs 5-3
load sharing 1-28
See AC-input power supplies; DC-input power
supplies; external power supplies
preventing ESD damage 2-2
R
rack-mounting
switches 3-3
Redundancy modules 4-15, 5-7
removing
AC-input power supplies 4-4
DC-input power supplies 4-8
repacking switches B-1
replacing
AC-input power supplies 4-6 to 4-8
DC-input power supplies 4-11 to 4-13
fan assemblies 4-14
reset switches D-3