Cisco Catalyst 9200 - Page 107

Authenticated HTTPs proxy configurations are not supported.
Note
To configure and enable the Call Home service through an HTTPs proxy, perform this procedure:
SUMMARY STEPS
1. enable
2. configure terminal
3. call-home
4. contact-email-address email-address
5. http-proxy proxy-address proxy-port port-number
6. profile CiscoTAC-1
7. destination transport-method http
8. no destination transport-method email
9. profile name
10. reporting smart-licensing-data
11. destination transport-method http
12. destination address http url
13. active
14. exit
15. exit
16. service call-home
17. ip http client proxy-server proxy-address proxy-port port-number
18. exit
19. copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Enter your password, if prompted.
Device> enable
Enters global configuration mode.configure terminal
Example:
Step 2
Device# configure terminal
Enters Call Home configuration mode.call-home
Example:
Step 3
Device(config)# call-home
Configures the default email address as
sch-smart-licensing@cisco.com.
contact-email-address email-address
Example:
Step 4
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
93
Configuring Smart Licensing
Configuring the Call Home Service for Direct Cloud Access through an HTTPs Proxy Server