EasyManua.ls Logo

Cisco Catalyst 9200

Cisco Catalyst 9200
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
Decrypts the private-config file and saves the file in plane
format.
write memory
Example:
Step 4
Device# write memory
Verifying the Status of Encryption
Use the show parser encrypt file status command to verify the status of encryption. The following command
output indicates that the feature is available but the file is not encrypted. The file is in ‘plain text’ format.
Device#show parser encrypt file status
Feature: Enabled
File Format: Plain Text
Encryption Version: Ver1
Feature Information for Secure Storage
This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
Feature InformationFeatureRelease
Secure Storage feature allows you to secure critical
configuration information by encrypting it. It
encrypts asymmetric key-pairs, pre-shared secrets,
the type 6 password encryption key and certain
credentials. An instance-unique encryption key is
stored in the hardware trust anchor to prevent it
from being compromised.
Secure StorageCisco IOS XE Fuji 16.9.2
Use Cisco Feature Navigator to find information about platform and software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn.
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
229
Configuring Secure Storage
Verifying the Status of Encryption

Table of Contents

Related product manuals