Name: Cisco Catalyst 9200
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

How to Use Configuration Replace and Configuration Rollback

Creating a Configuration Archive

No prerequisite configuration is needed to use the configure replace command. Using the configure replace

command in conjunction with the Cisco IOS configuration archive and the archive configcommand is optional

but offers significant benefit for configuration rollback scenarios. Before using the archive config command,

the configuration archive must be configured. Perform this task to configure the characteristics of the

configuration archive.

SUMMARY STEPS

1. enable

2. configure terminal

3. archive

4. path url

5. maximum number

6. time-period minutes

7. end

8. archive config

DETAILED STEPS

PurposeCommand or Action

Enables privileged EXEC mode.enable

Step 1

Example:

• Enter your password if prompted.

Device> enable

Enters global configuration mode.configure terminal

Example:

Step 2

Device# configure terminal

Enters archive configuration mode.archive

Example:

Step 3

Device(config)# archive

Specifies the location and filename prefix for the files in

the Cisco IOS configuration archive.

path url

Example:

Step 4

System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)

185

Configuration Replace and Configuration Rollback

How to Use Configuration Replace and Configuration Rollback

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 9200 and is the answer not in the manual?

Cisco Catalyst 9200 Specifications

General