PurposeCommand or Action
• (Optional) month—Specifies the month (January,
February...).
• (Optional) hh:mm—Specifies the time (24-hour format)
in hours and minutes.
• (Optional) offset—Specifies the number of minutes to
add during summer time. The default is 60.
Returns to privileged EXEC mode.end
Example:
Step 5
Device(config)# end
Verifies your entries.show running-config
Example:
Step 6
Device# show running-config
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Step 7
Device# copy running-config startup-config
Follow these steps if summer time in your area does not follow a recurring pattern (configure the exact date
and time of the next summer time events):
SUMMARY STEPS
1. enable
2. configure terminal
3. clock summer-time zone date[ month date year hh:mm month date year hh:mm [offset]]orclock
summer-time zone date [date month year hh:mm date month year hh:mm [offset]]
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Step 1
Device> enable
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
14
Administering the Device
To Next Page
Loading...
