To move the clamp in direction 3b, use a flathead screwdriver or similar device and push the clamp latch
down. Figure 32: Clamp Latch - Detail provides a clearer view of the clamp latch and the direction in which
you have to push the latch to move it in direction 3b.
Figure 31: Positioning the Clamp
Directions in which the clamp can be moved,
towards the power supply and away from it.
3a and
3b
The end that is fixed to the power supply
module
1
--Clamp Latch2
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
100
Removing and Replacing FRUs
Power Cord Retainer Mechanism
To Next Page
Loading...
Need help?
General