Cisco Catalyst C9200L-24PXG-4X-E Hardware Installation Guide

Specifications for the Power Supplies and Fans
Table 22: Power Specifications for the AC Power Supplies
Power Requirements
• PWR-C5-125WAC and PWR-C6-125WAC: 125
W
• PWR-C5-600WAC and PWR-C6-600WAC: 600
W
• PWR-C5-1KWAC and PWR-C6-1KWAC: 1000
W
Maximum output power
100 to 240 VAC(autoranging) 50-60 HzInput voltage and Frequency
• PWR-C5-125WAC and PWR-C6-125WAC:
1.6-0.7A
• PWR-C5-600WAC and PWR-C6-600WAC:
7-2.8A
• PWR-C5-1KWAC and PWR-C6-1KWAC:
12-6A
Input current
• PWR-C5-125WAC and PWR-C6-125WAC: 12V
@ 10.5A
• PWR-C5-600WAC and PWR-C6-600WAC: 54V
@ 11.1A
• PWR-C5-1KWAC and PWR-C6-1KWAC: 54V
@ 16.5A
Output ratings
• PWR-C5-125WAC and PWR-C6-125WAC:
426.5 BTUs per hour, 125W
• PWR-C5-600WAC and PWR-C6-600WAC:
2047.3 BTUs per hour, 600W
• PWR-C5-1KWAC and PWR-C6-1KWAC: 3412
BTUs per hour, 1000W
Total output BTU
Table 23: Fan Module Environmental and Physical Specifications
Environmental Ranges
23 to 176°F (–5 to 80°C)
Operating temperature
–40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m)Storage temperature
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
107
Technical Specifications
Specifications for the Power Supplies and Fans

Cisco Catalyst C9200L-24PXG-4X-E Specifications

General

Brand	Cisco
Model	Catalyst C9200L-24PXG-4X-E
Category	Switch
Language	English