CHAPTER 4
Installing a Compact Switch
• Shipping Box Contents, on page 49
• Mounting the Switch, on page 51
• Connecting the System Ground, on page 65
• Attaching the Adapter Bracket to the Switch (Optional), on page 66
• Installing the Power Cord Retainer (Optional), on page 69
• Installing the Cable Guard (Optional), on page 71
• Installing an SFP or SFP+ Module, on page 73
• 10/100/1000 PoE and PoE+Port Connections, on page 74
• 10/100/1000/Multigigabit Ethernet Port Connections, on page 75
Shipping Box Contents
The shipping box contains the model of the switch you ordered and other components needed for installation.
Some components are optional, depending on your order.
Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Verify that you have received these items. If any item is missing
or damaged, contact your Cisco representative or reseller for instructions.
Note
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
49
To Next Page
Loading...
Need help?
General