Feature Function
RF Version:
64/256 QAM RF
Output (2)
Provides a separate physical connector for each QAM output
(up to 2)
Allows independent level control for each QAM signal
Allows an adjustable output center frequency range of
91 MHz to 869 MHz
Provides a switched filter bank for superior broadband
combined noise performance
Supports International Telecommunications Union (ITU) J.83
Annex-A, and Annex-B, and Annex-C standards
User Interface
Features
Allows local setting of RF power levels and display of diagnostic
and debug information through the front panel and user interface
To Next Page
Loading...
General