Record the MAC Address
This section contains instructions for recording the MAC address as part of the
installation process.
Recording the MAC Address
1 Unpack and inspect the modulator.
2 Locate the label containing the MAC addresses on the underside of the chassis.
Important! The GbE MAC addresses are typically the MAC address of the
modulator plus 1 (one).
Examples:
GQAM MAC Address: 00:02:de:41:51:03
GbE MAC Address (Main): 00:02:de:41:51:04
GbE MAC Address (Backup): 00:02:de:41:51:05
3 Record the MAC addresses here:
- GQAM MAC Address: ______________________________________
- GbE MAC Address (Main): _______________________________________
- GbE MAC Address (Backup): _____________________________________
Important! You will need these MAC addresses for provisioning (configuring)
the DNCS.
4 Go to Stacking Guidelines (on page 20).
To Next Page
Loading...
General