Cisco GoQAM User Manual

Troubleshooting Boot Screen Error Messages
4004834 Rev D 143
Troubleshooting Boot Screen Error Messages
This section contains examples of warning screens associated with booting error
conditions. Some booting error conditions may require you to contact Cisco Services.
Booting Error Messages
The following table lists booting error conditions sorted alphabetically by error type,
and provides suggestions for correcting the error condition.
Error Condition LCD Messages Check and Correct
Application Code
Download Failure
Screens

Bad TFTP Checksum
The following message appears if the GoQAM is
unable to download application code execution
files from the TFTP server due to a bad
checksum.
Bad TFTP App Checksum
Restarting...
The GoQAM automatically reboots.

Unable to TFTP App Code (Boot Mode=2)
The following message appears if the GoQAM is
unable to download application code execution
files from the TFTP server during boot mode 2.
Unable to TFTP App Code
Restarting...
The GoQAM automatically reboots.
Unable to TFTP App Code (Boot Mode=1)
The following message appears if the GoQAM is
unable to download the application code
execution files from the TFTP server during boot
mode 1.
Unable to TFTP App Code
Continuing Startup...
The GoQAM then starts the application program.

A corrupted
application file
may cause this
condition.

Reinstall the
GoQAM
package on the
DNCS if all
GoQAMs have
this error
condition.

Check IP
connectivity.

Contact Cisco
Services.
Note: Refer to
Understand
the Boot
Process (on
page 78) for
detailed
descriptions of
the boot
process.

Cisco GoQAM Specifications

General

Brand	Cisco
Model	GoQAM
Category	Modulator
Language	English