2-568
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show spanning-tree
show spanning-tree
Use the show spanning-tree user EXEC command to display spanning-tree state information.
show spanning-tree [bridge-group | active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | mst | pathcost method | root | summary [totals] |
vlan vlan-id] [ | {begin | exclude | include} expression]
show spanning-tree bridge-group [active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | root | summary] [| {begin | exclude | include}
expression]
show spanning-tree vlan vlan-id [active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | root | summary] [ | {begin | exclude | include}
expression]
show spanning-tree {vlan vlan-id | bridge-group} bridge [address | detail | forward-time |
hello-time | id | max-age | priority [system-id] | protocol] [ | {begin | exclude | include}
expression]
show spanning-tree {vlan vlan-id | bridge-group} root [address | cost | detail | forward-time |
hello-time | id | max-age | port | priority [system-id] [ | {begin | exclude | include}
expression]
show spanning-tree interface interface-id [active [detail] | cost | detail [active] | inconsistency |
portfast | priority | rootcost | state] [ | {begin | exclude | include} expression]
show spanning-tree mst [configuration [digest]] | [instance-id [detail | interface interface-id
[detail]] [ | {begin | exclude | include} expression]
Syntax Description bridge-group (Optional) Specify the bridge group number. The range is 1 to 255.
active [detail] (Optional) Display spanning-tree information only on active interfaces
(available only in privileged EXEC mode).
blockedports (Optional) Display blocked port information (available only in privileged
EXEC mode).
bridge [address | detail |
forward-time | hello-time |
id | max-age | priority
[system-id] | protocol]
(Optional) Display status and configuration of this switch (optional
keywords available only in privileged EXEC mode).
detail [active] (Optional) Display a detailed summary of interface information (active
keyword available only in privileged EXEC mode).
inconsistentports (Optional) Display inconsistent port information (available only in
privileged EXEC mode).
To Next Page
Loading...
Need help?
General
