Cisco ME 3400 - Show Cpu Traffic Qos

2-414
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show cpu traffic qos
show cpu traffic qos
Use the show cpu traffic qos command in user EXEC mode to display the QoS marking values for
CPU-generated traffic.
show cpu traffic qos [ | begin | exclude | include expression]
Syntax Description
Defaults Displays output the QoS marking values for all CPU-generated traffic.
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples The following is sample output from the show cpu traffic qos command:
Switch> show cpu traffic qos
QOS - CPU Generated Traffic
---------------------------
Set parameter-type To parameter-value/From
parameter-type based on table-map
---------------------------------------------------------
Cos cos
precedence table-map map1
DSCP Default
Precedence dscp
Qos Group 5
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)SE This command was introduced.
Command Description
class-map Configures a class map to be used for matching packets to a specified
criteria and enters class-map configuration mode.
cpu traffic qos cos Configures class of service (CoS) marking for control plane traffic.