C-30
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform port-asic
show platform port-asic
Use the show platform port-asic privileged EXEC command to display platform-dependent port
application-specific integrated circuit (ASIC) register information.
show platform port-asic {cpu-queue-map-table [asic number | port number [asic number]] |
dest-map index number | etherchannel-info [asic number | port number [asic number]] |
exception [asic number | port number [asic number]] | global-status [asic number |
port number [asic number]] | learning [asic number | port number [asic number]] |
mac-info [asic number | port number [asic number]] | mvid [asic number] |
packet-info-ram [asic number | index number [asic number]] |
port-info [asic number | port number [asic number]] |
prog-parser [asic number | port number [asic number]] |
receive {buffer-queue | port-fifo | supervisor-sram} [asic number | port number [asic
number]] | span [vlan-id [asic number] | [asic number]
stats {drop | enqueue | miscellaneous | supervisor} [asic number | port number [asic
number]] |
transmit {port-fifo | queue | supervisor-sram} [asic number | port number [asic number]]
vct [asic number | port number [asic number]]}
[ | {begin | exclude | include} expression]
Syntax Description cpu-queue-map-table
[asic number | port number
[asic number]]
Display the CPU queue-map table entries. The keywords have
these meanings:
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27.
dest-map index number Display destination-map information for the specified index. The
range is 0 to 65535.
etherchannel-info [asic number |
port number [asic number]]
Display the contents of the EtherChannel information register. The
keywords have these meanings:
• asic number—(Optional) Display information for the
specified ASIC. The number is always 0.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
exception [asic number | port
number [asic number]]
Display the exception-index register information. The keywords
have these meanings:
• asic number—(Optional) Display information for the
specified ASIC. The number is always 0.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
To Next Page
Loading...
Need help?
General
