2-20
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
boot buffersize
boot buffersize
Use the boot buffersize global configuration command to configure the NVRAM size. Use the no form
of this command to return to the default.
boot buffersize size
no boot buffersize
Syntax Description
Defaults The default NVRAM buffer size is 512 KB.
Command Modes Global configuration
Command History
Usage Guidelines The default NVRAM buffer size is 512 KB. In some cases, the configuration file might be too large to
save to NVRAM. You can configure the size of the NVRAM buffer to support larger configuration files.
After you configure the NVRAM buffer size, reload the switch.
Examples This example shows how to configure the NVRAM buffer size:
Switch(config)# boot buffersize 524288
Switch(config)# end
Related Commands
size The NVRAM buffer size in KB.
The valid range is from 4096 to 1048576.
Release Modification
12.2(55)SE This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.
To Next Page
Loading...
