Cisco ME 3400 Command Reference

2-299
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
no mab logging verbose
no mab logging verbose
Use the no mab logging verbose global configuration command on the switch stack or on a standalone
switch to filter detailed information from MAC authentication bypass (MAB) system messages.
no mab logging verbose
Defaults All details are displayed in the system messages.
Syntax Description This command has no arguments or keywords.
Command Modes Global configuration
Command History
Usage Guidelines This command filters details, such as anticipated success, from MAC authentication bypass (MAB)
system messages.
Examples To filter verbose MAB system messages:
Switch(config)# no mab logging verbose
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Release Modification
12.2(55)SE This command was introduced.
Command Description
no authentication
logging verbose
Filters details from authentication system messages.
no dot1x logging
verbose
Filters details from 802.1x system messages.
no mab logging
verbose
Filters details from MAC authentication bypass (MAB) system messages.

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing