2-415
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-10
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
show cpu traffic qos
cpu traffic qos dscp Configures quality of service (QoS) marking based on DSCP for control
plane traffic.
cpu traffic qos
precedence
Configure quality of service (QoS) marking based on precedence for
control plane traffic.
cpu traffic qos
qos-group
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services
code point (DSCP), or IP-precedence packet markings.
policy-map Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
show policy-map Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.
show running-config Displays the configured class maps, policy maps, table maps, and
aggregate policers.
show table-map Displays information for all configured table maps or the specified table
map.
table-map Configures quality of service (QoS) mapping and enters table-map
configuration mode.
Command Description
To Next Page
Loading...
