Cisco NCS 1002 System Setup And Software Installation Guide

Last Event Reason : "HW Event OK"
Platform Information for 0/FT0
PID : NCS1K-FTA
Description : "Network Convergence System 1000 Fan"
VID/SN : V01
HW Oper State : OPERATIONAL
SW Oper State : N/A
Configuration : "NSHUT RST"
HW Version : 0.1
Last Event : HW_EVENT_OK
Last Event Reason : "HW Operational"
Platform Information for 0/FT1
PID : NCS1K-FTA
Description : "Network Convergence System 1000 Fan"
VID/SN : V01
HW Oper State : OPERATIONAL
SW Oper State : N/A
Configuration : "NSHUT RST"
HW Version : 0.1
Last Event : HW_EVENT_OK
Last Event Reason : "HW Operational"
Platform Information for 0/FT2
PID : NCS1K-FTA
Description : "Network Convergence System 1000 Fan"
VID/SN : V01
HW Oper State : OPERATIONAL
SW Oper State : N/A
Configuration : "NSHUT RST"
HW Version : 0.1
Last Event : HW_EVENT_OK
Last Event Reason : "HW Operational"
Verify Software Version
The NCS 1002 is shipped with the Cisco IOS XR software pre-installed. Verify that the latest version of the
software is installed. If a newer version is available, perform a system upgrade. This will install the newer
version of the software and provide the latest feature set on the NCS 1002.
To verify the version of Cisco IOS XR software running on the NCS 1002, perform the following procedure.
Procedure
show version
Displays the software version and details such as system uptime.
Example:
RP/0/RP0/CPU0:ios# show version
Wed Aug 8 16:10:20.694 IST
Cisco IOS XR Software, Version 6.5.1
Copyright (c) 2013-2018 by Cisco Systems, Inc.
Build Information:
System Setup and Software Installation Guide for Cisco NCS 1002
23
Perform Preliminary Checks
Verify Software Version

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English