Cisco NCS 1002 System Setup And Software Installation Guide

Built By : ahoang
Built On : Mon Aug 6 14:00:31 PDT 2018
Built Host : iox-ucs-023
Workspace : /auto/srcarchive17/prod/6.5.1/ncs1k/ws
Version : 6.5.1
Location : /opt/cisco/XR/packages/
cisco NCS-1002 () processor
System uptime is 1 day 5 hours 15 minutes
What to do next
Verify the result to ascertain whether a system upgrade is required. If the upgrade is required, see the Perform
System Upgrade and Install Feature Packages, on page 47 chapter.
Verify Firmware Version
The firmware on various hardware components of the NCS 1002 must be compatible with the installed Cisco
IOS XR image. Incompatibility may cause the NCS 1002 to malfunction.
To verify the firmware version, perform the following procedure.
Procedure
Step 1 show hw-module fpd
Thu Mar 29 15:41:51.520 IST
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
------------------------------------------------------------------------------
0/0 NCS1002-K9 1.2 CDSP_PORT_05 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_06 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_12 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_13 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_19 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_20 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_26 CURRENT 3.77 3.77
0/0 NCS1002-K9 1.2 CDSP_PORT_27 CURRENT 3.77 3.77
0/0 NCS1002-K9 2.1 CFP2_PORT_05 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_06 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_12 CURRENT 5.52 5.52
0/0 NCS1002-K9 4.2 CFP2_PORT_13 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_19 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_20 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_26 CURRENT 5.52 5.52
0/0 NCS1002-K9 2.1 CFP2_PORT_27 CURRENT 5.52 5.52
0/0 NCS1002-K9 0.1 CTRL_BKP_LOW B CURRENT 2.23
0/0 NCS1002-K9 0.1 CTRL_BKP_UP B CURRENT 2.23
0/0 NCS1002-K9 0.1 CTRL_FPGA_LOW CURRENT 2.23 2.23
0/0 NCS1002-K9 0.1 CTRL_FPGA_UP CURRENT 2.23 2.23
0/RP0 NCS1K-CNTLR 0.1 BIOS_Backup BS CURRENT 14.00
0/RP0 NCS1K-CNTLR 0.1 BIOS_Primary S CURRENT 14.40 14.40
0/RP0 NCS1K-CNTLR 0.1 Daisy_Duke_BKP BS CURRENT 0.15
0/RP0 NCS1K-CNTLR 0.1 Daisy_Duke_FPGA S CURRENT 0.17 0.17
System Setup and Software Installation Guide for Cisco NCS 1002
24
Perform Preliminary Checks
Verify Firmware Version

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English