Cisco NCS 1002 System Setup And Software Installation Guide

RP/0/RP0/CPU0:ios#install add source harddisk: ncs1k-k9sec-3.2.0.0-r652.x86_64$
Thu Aug 3 11:11:27.821 UTC
Aug 03 11:11:29 Install operation 1 started by root:
install add source harddisk: ncs1k-k9sec-3.2.0.0-r652.x86_64.rpm
Aug 03 11:11:30 Install operation will continue in the background
RP/0/RP0/CPU0:ios#RP/0/RP0/CPU0:Aug 3 11:11:34.411 : sdr_instmgr[1131]:
%INSTALL-INSTMGR-2-OPERATION_SUCCESS : Install operation 1 finished successfully
Aug 03 11:11:36 Install operation 1 finished successfully
The software files are unpacked from the package and added to the software repository. This operation may
take time depending on the size of the files being added. The operation is performed in asynchronous mode.
The install add command runs in the background, and the EXEC prompt is returned.
Step 2 show install request
Example:
RP/0/RP0/CPU0:ios#show install request
(Optional) Displays the operation ID of the add operation and its status. The operation ID can be used later
to execute the activate command.
Step 3 show install repository
Example:
RP/0/RP0/CPU0:ios#show install repository
Wed Feb 28 03:31:13.839 UTC
4 package(s) in XR repository:
ncs1k-k9sec-4.1.0.0-r65231I.x86_64
ncs1k-xr-6.5.2.31I
ncs1k-k9sec-4.1.0.0-r65230I.x86_64
ncs1k-xr-6.5.2.30I
Displays packages that are added to the repository. Packages are displayed only after the install add operation
is complete.
Step 4 show install inactive
Example:
RP/0/RP0/CPU0:ios#show install inactive
Wed Feb 28 03:31:34.323 UTC
2 inactive package(s) found:
ncs1k-k9sec-4.1.0.0-r65230I
ncs1k-xr-6.5.2.30I
Displays inactive packages that are present in the repository. Only inactive packages can be activated.
Step 5 Execute one of these commands:
• install activate package_name
• install activate id operation_id
Example:
RP/0/RP0/CPU0:ios#install activate ncs1k-k9sec-4.1.0.0-r65230I
or
RP/0/RP0/CPU0:ios#install activate id 2
System Setup and Software Installation Guide for Cisco NCS 1002
51
Perform System Upgrade and Install Feature Packages
Install Packages

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English