Cisco NCS 5000 Series Hardware Installation Guide

SpecificationsDC Power Supply Properties
YesRoHS Compliance
The minimum cable sizing required for DC power supply is 10 AWG.Note
Specifications for the Cisco NCS 5002 Power Supply
The following table lists the Power supply specifications for the Cisco NCS 5002 Series router.
Table 19: Specifications for the Cisco NCS 5002 AC Power Supply
SpecificationsAC Power Supply Properties
357 WTypical operating power
650 WMaximum Power
110/220Input Voltage
47 Hz to 53 HzFrequency
94% (At 50% Load)Efficiency
YesRoHS Compliance
YesHot Swappable
YesPort side exhaust air flow power supply
YesPort side intake air flow power supply
Table 20: Specifications for the Cisco NCS 5002 DC Power Supply
SpecificationsDC Power Supply Properties
511 WTypical operating power
930 WMaximum Power
-48/-60Input Voltage
94% (At 50% Load)Efficiency
Hardware Installation Guide for Cisco NCS 5000 Series Routers
50
Technical Specifications
Specifications for the Cisco NCS 5002 Power Supply

Cisco NCS 5000 Series Specifications

General

Brand	Cisco
Model	NCS 5000 Series
Category	Network Router
Language	English