CHAPTER 2
Preparing for Installation
This chapter describe how to prepare for the installation of the Cisco N540-6Z14S-SYS-D router at your site,
and contains the following sections:
• Safety Guidelines, on page 5
• Site Planning, on page 10
Safety Guidelines
Before you begin the installation of the Cisco N540-6Z14S-SYS-D routers, review the safety guidelines in
this chapter to avoid injuring yourself or damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco N540-6Z14S-SYS-D router, review the
safety warnings listed in the Regulatory Compliance and Safety Information for the Cisco NCS 540 Series
Routersdocument.
The following sections describe the safety guidelines of the router:
Standard Warning Statements
To see translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety
Information for the Cisco NCS 540 Series Router document.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit
should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting this unit in a
partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of
the rack. If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack. Statement 1006.
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017.
Warning
Cisco Network Convergence System 540 Passive Cooled Small Density Routers Hardware Installation Guide
5
To Next Page
Loading...
Need help?
General
