Cisco NCS 540 Installation Guide

CONTENTS
Cisco NCS 540 Small Density Passive Cooled Routers Overview 1
CHAPTER 1
Network Interfaces 1
Cisco NCS 540 Small Density Passive Cooled Router Features 2
Specification 3
Interface Naming 3
External Alarm Inputs 3
Console 4
USB Console 4
Online Insertion and Removal 4
Supported Transceiver Modules 4
Preparing for Installation 5
CHAPTER 2
Safety Guidelines 5
Standard Warning Statements 5
Safety Guidelines for Personal Safety and Equipment Protection 6
Safety Precautions for Module Installation and Removal 7
Safety with Electricity 7
Power Supply Considerations 10
Preventing ESD Damage 10
Site Planning 10
General Precautions 11
Site Planning Checklist 11
Site Selection Guidelines 11
Environmental Requirements 11
Physical Characteristics 12
Clearance Guidelines 12
Cisco Network Convergence System 540 Passive Cooled Small Density Routers Hardware Installation Guide
iii

Cisco NCS 540 Specifications

General

Operating System	Cisco IOS XR
Memory	16 GB DDR4
Storage	128 GB SSD
Ports	Multiple 1G/10G/40G/100G Ethernet ports
Forwarding Capacity	800 Gbps
Redundancy	Redundant power supplies and fans
Form Factor	1 RU
Operating Relative Humidity	5% to 95% noncondensing
Input Voltage	100-240 VAC, 50-60 Hz
Power Supply	AC or DC
Processor	Quad-core 2.4 GHz