Cisco Room Panorama - Mount the Vertical Risers

11
2. Mount the vertical risers
2.1. Assemble the risers
Enter the upper part into the lower part, and fasten with two screws (M6x12, Torx 30). Repeat for all the risers.
6x
6x 35x
(M6x12, Torx 30)
lower parts
upper part
Riser parts
1x
upper part, center
The system has seven vertical risers, which are
attached to the rails. The center riser differs from
the others; it has a setback to make space for the
content screen
Center riser (1x) Other risers (6x)
Slots on this side (away from the wall) Slots on this side (away from the wall)
A3
A4
B2
B1
1x
lower parts