60
20. Mount the camera
Camera
1x
Camera bracket
1x
Camera
2x
(M6x12, Torx 30)
The camera is mounted on a bracket that is
fastened to the content cavity.
20.1. Mount the camera bracket
The camera bracket is fastened to the content
cavity with two screws (M6x12, Torx 30).
×2
20.2. Set the camera tilt angle to 10°
There are two sliders for adjusting the camera tilt
angle at the bottom of the camera.
Flip down the brackets and move the sliders
to 10°, which is the required tilt angle for this
product.
Flip the brackets back when done.
10°
A7
C9
To Next Page
Loading...