Cisco Room Panorama - Mount the Speaker Grille

86
26. Mount the speaker grille
The speaker grille is split at center; each part is
fastened by magnets.
Speaker grille
2x
Speaker grille (left and right)
1x
Deco ring
Place the grille in front of the loudspeakers, and
align the two parts nicely. Make the split line
between the parts as tight as possible.
Plastic washers on the grille fit into slots above the
loudspeakers; see the close up illustrations.
26.1. Mount the speaker grille
Grille, rear view.
Loudspeaker mounting
structure, front view.
Plastic washers on the
inside of the grille
Slots above the loudspeakers
D5
C7