33
13. Organize the cables neatly
The system has many cables!
To avoid rattling noise and to have a nice looking
system we recommend you to fasten the cables to
the steel structure with velcro straps.
The main cable routes are:
• From the codec:
• Upward and to the sides
• Downward through the flex tubes (will be
installed later)
• From the amplifier:
• Upward
• From the Ethernet switch:
• Through to the rack cavity and upward
together with the cables from the codec
• To the left and right on top of the cavities
• To the Samsung One Connect boxes (will be
installed later):
• Downward through the hole on top of the
display cavities
Don't thread cables through the hole in the back
plate of the rack cavity. This hole should only be
used if you prefer routing the cables for the table
through the wall, and either over the ceiling or
under the floor, instead of using the flex tubes.
Right power cavity
Left power cavity
Rack cavity Right display cavity
To Next Page
Loading...