Cisco Room Panorama - Mount the Right Screen and Deco Grille

69
24. Mount the right screen and deco grille
Screen
1x
Main screen, 85"
D3
2x
Screen rail B10
Deco grille
4x
(M6x12, Torx 30)
1x
Right deco grille
D5
The main screens (left and right) will hang on
screen mount modules, which allow you to move
a screen up and down. During the mounting of a
screen it will be in its lower position most of the
time.
Follow the installation instructions carefully,
installing the right screen first. Then push the right
screen up into normal position before you start
installing the left screen.
To avoid scratching the screens, we recommend
that only one screen is in the lower position at a
time.
The deco grille, which is split at center, is attached
to the main screens. Each part has a handle at
center for pulling the screen up and down.
1x
One Connect box D3
D3
1x
Long straightening bar
B15
1x
Short straightening bar B15
2x
Deco grille vertical support B15
1x
Deco grille support with handle B15
1x
One Connect cable clip
4x
(M4x8, Torx 20)
10x
(M8x8, Torx 40)