15
3.2. Place the subwoofers in the stands
×4
×4
Push the subwoofer all the way down into the stand.
Check that the foam doesn't curl when pushing it down.
Note that - counting from the left:
• Subwoofer number 1 and 3: Black finish facing the room
• Subwoofer number 2 and 4: Silver finish facing the room
Black finish facing
the room
Silver finish facing
the room
Add a piece of foam - 50 × 50 mm (2 × 2 in.) - on the
upper part of the subwoofer to prevent it from touching
the riser and cause rattling noise.
Add a piece of foam
on the subwoofer to
prevent noise
To Next Page
Loading...