45
Power cable (S9) HDMI (S3)and
Ethernet (S6) cables
1. Enter one screw (M6x12, Torx 30) into the cavity
as shown, without tightening.
1. Enter two screws (M6x12, Torx 30) into the cavity
as shown, without tightening.
18.3. Place the screen cables
Thread the cables for the content screen up
through the holes in the content cavity:
• HDMI (S3) and Ethernet (S6) to the right
• Power (S9) to the left
2. Hang the bracket onto the screw. Tighten the
screw, and add two more
(M6x12, Torx 30).
2. Hang the bracket onto the screws, and tighten
them.
18.4. Mount the upper screen bracket 18.5. Mount the lower screen bracket
To Next Page
Loading...