52
19.6. Attach the wall top trims
The left and right trims are different; check that
you mount them the correct way.
Fit the trim fully into the groove of the front panel,
before you fasten them.
Repeat the procedure on both sides.
Three screws (M4x12, Torx 20) from the front.
In the corner, two screws
(M4x12, Torx 20)
from the top. Push the corner panel toward
center when entering these screws.
This side toward the corner.
Do not tighten
these screws
now.
To Next Page
Loading...