Cisco RV260 series User Manual

Step 3 Or, select Manual and set the following 6rd parameters.
a) Enter the IPv4 Address of Relay.
b) Enter the IPv4 Common Prefix Length.
c) Enter the IPv6 Prefix/Length. The IPv6 network (subnetwork) is identified by the prefix. All hosts in the network
have the identical initial bits for their IPv6 address. Enter the number of common initial bits in the network addresses.
Default is 64.
Step 4 Click Apply.
RV260x Administration Guide
54
WAN
IPv6 Rapid Deployment (6rd)

Cisco RV260 series Specifications

General

Brand	Cisco
Model	RV260 series
Category	Network Router
Language	English