Port Listen Status
This section displays the status of which ports are open to receiving data (listening).
• Protocol – Type of protocol used for communication.
• Listen IP Address – The listening IP address displays the interface it is listening on.
• Listen Port – The listening port serves as an endpoint in an operating system for many types of
communication.
Established Connection Status
This section displays status on which ports have an established connection.
• Protocol – Type of protocol used for communication.
• Local IP Address – IP address of the system.
• Local Port – Listening ports on different services.
• Foreign Address – IP address of the device connected.
• Foreign Port – Port of the device connected.
• Status – Connection status of the session.
Port Traffic
The Port Traffic page displays the statistics and status of the interfaces of the device. To view the device’s
Port Traffic page, click Status and Statistics >Port Traffic.
Port Traffic
• Port ID – Port ID.
• Port Label – Port label.
• Link Status – Status of the interface.
• RX Packets – Number of packets received on the port.
• RX Bytes – Number of packets received, measured in bytes.
• TX Packets – Number of packets sent on the port.
• TX Bytes – Number of packets sent and measured in bytes.
• Packet Error – Details about the error packets.
Wireless Traffic
• SSID Name – Details of the SSID name.
• Radio Name – Radio name.
• Status – Status of the port (example: port enabled or disabled or connected).
RV260x Administration Guide
14
Status and Statistics
Port Traffic
To Next Page
Loading...
Need help?
General
