Step 5 Under the heading for Primary Controller, use the dropdown provided to select whether to specify the server by name or
IP address. Fill in the name or addresses of the server in the fields provided.
Step 6 Select the protocol to use when communicating with the server. It is strongly recommended that HTTPS be used to ensure
the integrity of the provisioning process.
Step 7 If the protocol selected is HTTPS and the server is configured with a self-signed certificate (default) or one that is not
signed by a well-known certificate authority, then the certificate used by the server should be uploaded using the controls
provided.
Step 8 Click Next, and review the settings before clicking Submit.
Registering Devices
Certain products purchased directly from Cisco may be associated with your Cisco Smart Account at the time
of purchase, and these will automatically be added to Plug and Play Connect. However, the majority of Cisco's
100 to 500 series Plug and Play-enabled products will need to be registered manually. To register the devices
with Plug and Play Connect, follow these steps:
Step 1 Open the Plug and Play Connect web page https://software.cisco.com/#module/pnp in your browser. If necessary, select
the correct Virtual Account to use.
Step 2 Select the Devices link, and then click Add Devices. You may need to be approved to manually add devices to your
account. This is a one-time process, and, if it is required, you will be notified by email once approval has been granted.
Step 3 Choose whether to add devices manually, or to add multiple devices by uploading details in CSV format. Click the link
provided to download a sample CSV file. If you choose to upload a CSV file, click the Browse button to select the file.
Then click Next.
Step 4 If you selected to add devices manually, click Identify Device. Specify the Serial Number and Product ID for the device
to be added. Select a Controller Profile from the dropdown. Optionally enter a description for this device.
Step 5 Repeat Step 4 until you have added all your devices, then click Next.
Step 6 Review the devices that you have added, and then click Submit.
RV260x Administration Guide
45
System Configuration
Registering Devices
To Next Page
Loading...
Need help?
General
