EasyManuals Logo
Home>Cisco>Network Router>RV260 series

Cisco RV260 series User Manual

Cisco RV260 series
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
Step 15 In the Enable Security Set Router Password section, enter, and confirm the router password. You can check the
Disable Password Strength Enforcement to disable the strength enforcement.
Step 16 Click Next, and in the Network Name field, enter a name for the network.
Step 17 Click Next, and in the Enable Security Secure your Wireless Network, select the type of network security from the
following options:
Best Security (WPA2 Personal AES)
Recommended for new wireless computers and devices. Older wireless devices may not support this option.
Enter a security key with 8-63 characters or 64 hexadecimal digits, or use the randomly generated security
key, when you choose this option.
No Security (Not Recommended)
No additional security settings needed on the device. This mode means that any data transferred to and from
the device is not encrypted.
Step 18 Click Save security settings to save the security settings.
Step 19 Click Print security settings to print a copy of the router's security settings.
Step 20 Click Apply.
System
Assign a host name and a domain name to identify your device to ensure that it is easily identified y other
devices.
Step 1 Click System Configuration > System.
Step 2 In the Host Name field, enter a name to identify the device uniquely on your network. For example, Router001.
Step 3 In the Domain Name field, enter a domain in which your device is located. For example, example.com. If you do not
know the name of your organization's domain, contact your network administrator.
Step 4 Click Apply to apply your changes.
Time
Setting the time is critical for a network device so that every system log and error message is timestamped
for accurate tracking and synchronizing the data transfer with other network devices.
You can configure the time zone, adjust for daylight savings time if necessary, and select the Network Time
Protocol (NTP) server to synchronize the date and time.
To configure the time and NTP server settings, follow these steps:
Step 1 Click System Configuration > Time.
RV260x Administration Guide
33
System Configuration
System

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV260 series and is the answer not in the manual?

Cisco RV260 series Specifications

General IconGeneral
BrandCisco
ModelRV260 series
CategoryNetwork Router
LanguageEnglish

Related product manuals