Cisco RV260 series User Manual

Step 1 In the Syslog Servers section, check Enable to enable the syslog server.
Step 2 In the Syslog Server 1 field, enter the IP address of a syslog server to which the log messages are sent.
Step 3 In the Syslog Server 2 field, enter the IP address of a syslog server to which the log messages are sent.
Step 4 Click Apply.
Email
You can configure your device’s email server to your specifications.
Configuring Email
To configure the email server, follow these steps.
Step 1 Select System Configuration > Email.
Step 2 Under Email Server, enter the following:
Enter the address of the SMTP server.SMTP Server
Enter the SMTP port.SMTP Port
Select None or TLS/SSL as the email encryption method.Email Encryption
Select the type of authentication from the drop-down list: None, Cleartext, MD5 or
Login.
Authentication
Enter a username.Username
Enter a password.Password
Enter an email address to send to.Send Email to 1
Enter an email address to send to (optional).Send Email to 2
Enter an email address to send from.From Email Address
Step 3 Click Apply and Test Connectivity to Email Server to test connectivity.
Step 4 Click Clear to clear the current email settings.
Step 5 Click Apply.
User Accounts
You can create, edit, and delete local users and authenticate them using a local database for various services
like PPTP, VPN Client, and the Web GUI login. This enables the administrators to control and allow only
the local users access the network. You can also configure the web login session timeout.
RV260x Administration Guide
36
System Configuration
Email

Cisco RV260 series Specifications

General

Brand	Cisco
Model	RV260 series
Category	Network Router
Language	English