Cisco SCE 8000

C-23
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-DEBUG_SSH_ACCESS: "<%s> access to debug-ssh (port 2200)"
Explanation
This message is displayed when debug SSH access to port 2200 is enabled.
Recommended Action None.
Error Message %LOCAL7-6-BIND_VTY_SERVICE : "Telnet service bound to management vlan
(%u)"
Explanation
This message provides the details about the telnet service that is added in VLAN
management configurations, along with the VLAN ID.
Recommended Action None.
Error Message %LOCAL7-6-UNBIND_VTY_SERVICE: "Telnet service unbound from management
vlan (%u)"
Explanation
This message is displayed when the telnet service is unbound from the management
VLAN.
Recommended Action None.
Error Message %LOCAL7-6-BIND_SSH_SERVICE: "SSH service bound to management vlan
(%u)"
Explanation
This message is displayed when the SSH service is bound with the management VLAN.
Recommended Action None.
Error Message %LOCAL7-6-UNBIND_SSH_SERVICE: "SSH service unbound from management
vlan (%u)"
Explanation
This message is displayed when the SSH service is unbound from the management
VLAN.
Recommended Action None.
Error Message %LOCAL7-6-SERVER_ENABLED: "Web server enabled."
Explanation
This message is displayed when the web server is enabled.
Recommended Action None.
Error Message %LOCAL7-6-SERVER_DISABLED: "Web server disabled."
Explanation
This message is displayed when the web server is disabled.
Recommended Action None.