Cisco SCE 8000

C-24
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix C Cisco Service Control Engine System Log Messages
Informational Messages, Severity Level 6
Error Message %LOCAL7-6-BIND_SNMP_SERVICE: "SNMP service binded to management vlan
(%u)"
Explanation
This message is displayed when the SNMP service is bound to the management VLAN.
Recommended Action None.
Error Message %LOCAL7-6-UNBIND_SNMP_SERVICE: "SNMP service un-binded from management
vlan (%u)"
Explanation
This message is displayed when the SNMP service is unbound from the management
VLAN.
Recommended Action None.
Error Message %LOCAL7-6-NO_CONNECTIONS_OPEN: "No Formatter connection is open on
category %d."
Explanation
This message is displayed when no formatter connection is open in a category.
Recommended Action None.
Error Message %LOCAL7-6-MSG: "<%s>"
Explanation
This message provides details about the RPC client request to the server with its
requester ID.
Recommended Action None.
Error Message %LOCAL7-6-USER_FILES_CLEAR: "Cleared user log files"
Explanation
This message is displayed when user log files are cleared using the clear logger device
user-file-log command.
Recommended Action None.
Error Message %LOCAL7-6-LOGGER_STAM: "This a message with 5 parameters one %d two %d
three %d four %d five %d"
Explanation
This message is displayed by the debug message test function that is currently not in
use.
Recommended Action None.
Error Message %LOCAL7-6-LOGGER_USER_INFO_MSG: "<%s>"
Explanation
This message is displayed while adding a user message to the corresponding user log
using the logger add-user-message command.
Recommended Action None.