Cisco SCE 8000 - Page 7

Contents
5
Cisco SCE 8000 10 GBE Installation and Configuration Guide
OL-29124-01
Example for Restoring a Previous Configuration 7-10
Displaying the SCE Platform Version Information 7-12
Example for Displaying the SCE Platform Version Information 7-12
Displaying the SCE Platform Inventory 7-15
Examples for Displaying the SCE Platform Inventory 7-15
Displaying the SCE Platform Inventory: FRUs Only 7-15
Displaying the Complete SCE Platform Inventory 7-16
Displaying the System Uptime 7-19
Example for Displaying the System Uptime 7-19
Rebooting and Shutting Down the SCE Platform 7-20
Rebooting the SCE Platform 7-20
Examples for Rebooting the SCE Platform 7-20
How to Shut Down the SCE Platform 7-20
Examples for Shutting Down the SCE Platform 7-21
CHAPTER 8 Troubleshooting 8-1
Introduction 8-1
Troubleshooting Overview 8-2
Information About Troubleshooting Tools 8-2
CLI Commands for Troubleshooting 8-3
Checking the LEDs 8-5
Problem Solving Using a Subsystems Approach 8-7
Identifying Startup Problems 8-7
Troubleshooting the Power Subsystem 8-8
Troubleshooting the Firmware Package Installation 8-8
Troubleshooting the Management Subsystem 8-9
Troubleshooting the Link Interface Subsystem 8-11
Downgrading Cisco SCOS 8-12
Troubleshooting with the User Log 8-13
The Logging System 8-13
How to Copy the User Log to an External Source 8-13
How to Copy the User Log to an Internal Location 8-13
How to View the User Log 8-13
How to Clear the User Log 8-14
How to View the User Log Counters 8-14
How to View the Nonvolatile Counter for the User-file-log 8-14
Generating a File for Technical Support 8-14