Cisco SG220-26 Administration Guide

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 9
Contents
Chapter 19: SNMP 272
SNMP Versions and Workflow 272
Supported MIBs 275
Model Object IDs 276
Configuring SNMP Engine ID 276
Configuring SNMP Views 278
Configuring SNMP Groups 279
Managing SNMP Users 280
Configuring SNMP Communities 282
Configuring SNMP Notification Recipients 283
Configuring SNMPv1,2 Notification Recipients 284
Configuring SNMPv3 Notification Recipients 285
Appendix A: Where to Go From Here 287

Cisco SG220-26 Specifications

General

Model	SG220-26
Category	Switch
Ports	24 x 10/100/1000 + 2 x Gigabit SFP
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
PoE	No
Mounting	Rack-mountable
MAC Address Table Size	8K entries
Power Supply	Internal
Management	Web-based
Jumbo Frame Support	9216 bytes
Operating Temperature	0°C to 40°C (32° to 104°F)
Storage Temperature	-20°C to 70°C (-4° to 158°F)
Humidity	10% to 90%, non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p