Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 84
8
The LLDP protocol has an extension called LLDP Media Endpoint Discovery (LLDP
MED), which provides and accepts information from media endpoint devices such
as VoIP phones and video phones.
Following are examples of actions that can be performed with the LLDP feature in
a suggested order:
• Enable LLDP globally (LLDP is enabled by default), and enter LLDP global
parameters on the LLDP Properties page, as described in the Configuring
LLDP Properties section.
• Configure LLDP per port on the Port Settings page, as described in the
Configuring LLDP Port Settings section. On this page, ports can be
configured to receive or transmit LLDP PDUs, and specify which TLVs to
advertise.
• Create LLDP MED network policies on the LLDP MED Network Policy page,
as described in the Configuring LLDP MED Network Policy section.
• Associate LLDP MED network policies and the optional LLDP MED TLVs to
the desired ports on the LLDP MED Port Settings page, as described in the
Configuring LLDP MED Port Settings section.
• View LLDP global information and the LLDP status of each port as
described in the Viewing LLDP Port Status section.
• View LLDP local information as described in the Viewing LLDP Local
Information section.
• View LLDP neighbor information as described in the Viewing LLDP
Neighbors Information section.
• View LLDP statistics of each port as described in the Viewing LLDP
Statistics section.
• View LLDP overloading information as described in the Viewing LLDP
Overloading section.
To Next Page
Loading...
