EasyManuals Logo

Cisco SG220-26 Administration Guide

Cisco SG220-26
289 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 93
8
Current Capabilities—MED capabilities enabled on the port.
Device Class—LLDP MED endpoint device class.
PoE Device Type—(Only applicable for PoE models) Port PoE type, for
example, powered.
PoE Power Source—(Only applicable for PoE models) Port power source.
PoE Power Priority—(Only applicable for PoE models) Port power priority.
PoE Power Value—(Only applicable for PoE models) Port power value.
Hardware Revision—Hardware version.
Firmware Revision—Firmware version.
Software Revision—Software version.
Serial Number—Device serial number.
Manufacturer Name—Device manufacturer name.
Model Name—Device model name.
Asset ID—Asset ID.
Location Information
Civic—Street address.
Coordinates—Map coordinates: latitude, longitude, and altitude.
ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy Table
Application Type—Network policy application type, for example, Voice.
VLAN IDVLAN ID for which the network policy is defined.
VLAN TypeVLAN type for which the network policy is defined. The
possible field values are:
-
Tagged
—Indicates the network policy is defined for tagged VLANs.
-
Untagged
—Indicates the network policy is defined for untagged VLANs.
User Priority—Network policy user priority.
DSCP—Network policy DSCP.

Table of Contents

Other manuals for Cisco SG220-26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG220-26 and is the answer not in the manual?

Cisco SG220-26 Specifications

General IconGeneral
ModelSG220-26
CategorySwitch
Ports24 x 10/100/1000 + 2 x Gigabit SFP
Switching Capacity52 Gbps
Forwarding Rate38.69 Mpps
LayerLayer 2
PoENo
MountingRack-mountable
MAC Address Table Size8K entries
Power SupplyInternal
ManagementWeb-based
Jumbo Frame Support9216 bytes
Operating Temperature0°C to 40°C (32° to 104°F)
Storage Temperature-20°C to 70°C (-4° to 158°F)
Humidity10% to 90%, non-condensing
Standards ComplianceIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p

Related product manuals