EasyManuals Logo

Cisco SG350-28P Administration Guide

Cisco SG350-28P
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #595 background imageLoading...
Page #595 background image
Security: IPv6 First Hop Security
Common Tasks
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 454
26
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment (VLAN) or
Policy Attachment (Port) pages.
Router Advertisement Guard Work Flow
STEP 1 In the RA Guard Settings page, enter the list of VLANs on which this feature is enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are set in a
policy.
STEP 3 If required, either configure a user-defined policy or add rules to the default policies for the
feature.
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment (VLAN) or
Policy Attachment (Port) pages.
DHCPv6 Guard Work Flow
STEP 1 In the DHCPv6 Guard Settings page, enter the list of VLANs on which this feature is enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are set in a
policy.
STEP 3 If required, either configure a user-defined policy or add rules to the default policies for the
feature.
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment (VLAN) or
Policy Attachment (Port) pages.
Neighbor Discovery Inspection Work Flow
STEP 1 In the ND Inspection Settings page, enter the list of VLANs on which this feature is enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are set in a
policy.
STEP 3 If required, either configure a user-defined policy or add rules to the default policies for the
feature.

Table of Contents

Other manuals for Cisco SG350-28P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG350-28P and is the answer not in the manual?

Cisco SG350-28P Specifications

General IconGeneral
ModelSG350-28P
CategorySwitch
Ports28
PoE Ports24
PoE Budget195W
Switching Capacity56 Gbps
Forwarding Rate41.67 Mpps
LayerLayer 3
Rack MountableYes
Gigabit Ethernet Ports28
MAC Address Table Size16K
Power SupplyInternal
Jumbo Frame SupportYes
Dimensions (W x D x H)440 x 257 x 44 mm
Operating Temperature0°C to 40°C
Storage Temperature-20°C to 70°C
Humidity10% to 90% non-condensing

Related product manuals