Cisco SGE2000 Installation And Configuration Guide

CHAPTER
2-1
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
2
Introduction to the SCE Platform
This chapter provides an introduction to the SCE 2000 4xGBE Platform, the Service Control hardware
component.
• Information About The SCE Platform
Information About The SCE Platform
The Service Control Engine (SCE) platform, which is the hardware component of the Cisco Service
Control solution, is designed to support observation, analysis, and control of Internet/IP traffic. The
following table summarizes model information for the SCE 2000 platform
• Front Panel
• Back Panel
• Information About Checking the Shipping Container Contents
• SCE 2000 Installation Checklist
Front Panel
The SCE 2000 Front Panel consists of ports and LEDs as shown in the following figure and tables.
Table 2-1 SCE Platform Model Information
Model number SCE 2020 4xGBE
Link Type Gigabit Ethernet
Number of Ports 4
Number of Links 2

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg