5-4
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Setup Command Parameters
Table 5-1 Setup Command Parameters
Parameter Definition
IP address IP address of the SCE 2000 .
subnet mask Subnet mask of the SCE 2000 .
default gateway Default gateway.
Hostname Character string used to identify the SCE 2000 .
Maximum 20 characters.
admin password Admin level password. Character string from
4-100 characters beginning with an alpha
character.
root password Root level password. Character string from 4-100
characters beginning with an alpha character.
password encryption status Enable or disable password encryption?
Time Settings
time zone name and offset Standard time zone abbreviation and minutes
offset from UTC.
local time and date Current local time and date. Use the format:
00:00:00 1 January 2002
SNTP Configuration
broadcast client status Set the status of the SNTP broadcast client. If
enabled, the SCE will synchronize its local time
with updates received from SNTP broadcast
servers.
unicast query interval Interval in seconds between unicast requests for
update (64 – 1024)
unicast server IP address IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status Enable or disable IP DNS-based hostname
translation.
default domain name Default domain name to be used for completing
unqualified host names
IP address IP address of domain name server. ( maximum of
3 servers)
RDR Formatter Destination Configuration
IP address IP address of the RDR-formatter destination
TCP port number TCP port number of the RDR-formatter
destination
Access Control Lists
To Next Page
Loading...
Need help?
General
