Cisco SGE2000 Installation And Configuration Guide

2-8
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
Chapter 2 Introduction to the SCE Platform
Information About The SCE Platform
Network interface cables and
devices connected
System power turned on
System boot complete
(SYSTEM–UP LED is on)
Correct hardware configuration
displayed after system banner
appears
Table 2-5 SCE 2000 Installation Checklist
Task Verified By Date

Cisco SGE2000 Specifications

General

Jumbo Frame Support	9KB
VLANs	Up to 256
Management	Web-based, SNMP, CLI
Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w
Dimensions	440 x 44 x 257 mm
Power Supply	100 to 240V AC, 50-60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 90% non-condensing
Weight	3.2 kg