Network Security
802.1x Settings
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 119
7
• Reauthentication Period — Specifies the number of seconds in which the
selected port is reauthenticated (Range: 300-4294967295). The field
default is 3600 seconds.
• Quiet Period — Specifies the number of seconds that the switch remains in
the quiet state following a failed authentication exchange (Range: 1-65535).
The field default is 60 seconds.
• Resending EAP — Specifies the number of seconds that the switch waits
for a response to an EAP - request/identity frame, from the supplicant
(client), before resending the request. The field default is 30 seconds.
• Max EAP Request — The total amount of EAP requests sent. If a response is
not received after the defined period, the authentication process is
restarted. The field default is 2 retries.
• Supplicant Timeout — Displays the number of seconds that lapses before
EAP requests are resent to the supplicant (Range: 1-65535). The field
default is 30 seconds.
• Server Timeout — Specifies the number of seconds that lapses before the
switch resends a request to the authentication server (Range: 1-65535). The
field default is 30 seconds.
STEP 4 Define the relevant fields.
STEP 5 Click Save & Close to save the modifications and close the
Setting Timer Screen
(clicking Save keeps the
Setting Timer Screen
open). The defined configuration
appears in the 802.1x Table near the bottom of the
802.1x Settings Screen
.
To Next Page
Loading...
Need help?
General
