Security Suite
ARP Trusted Interfaces
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 144
8
-
Never
— Indicates that Syslog messages would not be generated.
STEP 2 Define the relevant fields.
STEP 3 Click Save Settings. The ARP Inspection configuration is defined, and the device is
updated.
ARP Trusted Interfaces
The
ARP Trusted Interfaces Screen
allows network managers to configure trusted
and untrusted interfaces. ARP Inspection is performed on untrusted interfaces
only.
To configure ARP Inspection for untrusted interfaces:
STEP 1 Click Security Suite > ARP Trusted Interfaces. The
ARP Trusted Interfaces Screen
opens.
Figure 64 ARP Trusted Interfaces Screen
For 8-port devices, the Trusted Interfaces Table displays the interfaces on multiple
screens. To browse to a specific interface entry, click the Previous, 1, 2, and Next
links above the table.
To Next Page
Loading...
