To Next Page

To Previous Page

Security Suite

ARP Trusted Interfaces

SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide 145

For 24-port devices, the Trusted Interfaces Table displays the interfaces on

multiple screens. To browse to a specific interface entry, click the Previous, 1, 2, 3,

and Next links above the table.

The

ARP Trusted Interfaces Screen

contains the following fields:

• Unit No. — Indicates the stacking member for which the Trusted Interface

settings are displayed.

• Interface — Indicates the port or LAG on which ARP Inspection Trust is

enabled or disabled.

• Trust Status — Enables or disables ARP Inspection Trust mode on the

interface. The possible field values are:

Enable

— Indicates the port or LAG is a trusted interface, and ARP

inspection is not performed on the ARP requests/replies sent to/from

the interface.

Disable

— Indicates the port or LAG is not a trusted interface, and ARP

inspection is performed on the ARP requests/replies sent to/from the

interface. This is the default value.

STEP 2 Enable or disable the Trust Status for the relevant interfaces.

STEP 3 Click Save Settings. The Trusted Interfaces are defined, and the device is

updated.

Cisco SPS208G User Manual

Other manuals for Cisco SPS208G